metal wire ties,
high strength cable ties
XGS Expand Nails With Electrical Power And Building Construction
Terminal: The terminal is an accessory product used for electrical connection, which is divided into connectors in industry.
With the increasing degree of industrial automation and the more and more strict and precise requirements of industrial control, the amount of terminal is increasing gradually. With the development of electronic industry, there are more and more kinds of terminals. At present the most widely used in addition to PCB board terminals, there are hardware terminals, nuts terminals, spring terminals and so on.
Cable end end: cable end head set waterproof, stress control, shielding, insulation in one, with good electrical and mechanical properties, can be used in various harsh environmental conditions for a long time. It has the advantages of light weight and convenient installation. Cable terminals are widely used in power, petrochemical, metallurgy, railway ports and construction.
The terminal is a piece of metal sealed in insulating plastic that is used to connect wires. It has holes in both ends that can be inserted into the wires and can be screwed or loosened. It's easy and fast. And suitable for a large number of wire interconnections, in the power industry there are special terminal row, terminal box, on top of the terminal, single layer, double layer, current, voltage, common, breakable and so on. A certain area of pressure is used to ensure reliable contact and sufficient current.
The terminals can be divided into WUK terminal, European terminal series, plug terminal series, Transformer terminal series, building wiring terminal series, gate terminal series, spring terminal series, rail terminal series, wall through terminal series, Photoelectric coupled terminal series, 110 terminals, 205 terminals, 250 terminals, 187 terminals, OD2.2 ring terminals, 2.5 ring terminals, 3.2 ring terminals, 4.2 ring terminals, 2 circle terminals, 6.4 ring terminals, 8.4 ring terminals, 11 ring terminals, 13 ring terminal flag series and sheathing series, various ring terminals, tube terminal type, 4-03 wire terminals, 2-03 band(iron band, 2-03 band) , 4-04, 6-03, 6-04, etc..)
The core of automatic control is that the control unit must be reliably isolated from the sensors and actuators to avoid interference. The Sanmenwan WUKG2 optical separation terminal can perform this function well and ensure that the field signal matches the low voltage required by the electronic control device. It can also act as an interface element between the process control peripheral device and the control, signal and regulator devices and is suitable for different voltage and power ranges.
The optical separation terminal has the advantages of high switching frequency, no mechanical contact jitter, no wear switch, high insulation voltage, no vibration, no position influence and long life, so it is widely used in automatic control.
Contact Person: Cheng