Payment & Shipping Terms:
indoor vacuum circuit breaker,
vacuum type circuit breaker
630A-1250A pull rod with high voltage indoor circuit breaker VCB/VS1
Epoxy resin pressure gel molding machine APG equipment factory produced by the epoxy resin molding machine good functioning, low noise, electricity consumption
Epoxy resin molding machine is a special pressure gel equipment which produces the product of the finished edge, casing, contact box, Transformer, etc.
The following models are available: epoxy resin molding machine 868-V, heating plate 800 x 650mm, epoxy resin molding machine 888-V, heating plate 800 x 800mm, epoxy resin molding machine 10108-V heating plate 1000 X 1000mm, epoxy resin molding machine 858-2V heating plate 800 x 500MM, epoxy resin molding machine is our factory through many years of practical experience and improved design, and the pressure of epoxy resin molding machine has been verified by customers for many years To date, a complete series of epoxy pressure molding machines have been developed
To date, a complete series has been developed. The pressure molding machine of epoxy resin adopts PTL C, which is more humane, and has the following characteristics in comparison with the domestic products:
The 10-year-old model has been lengthened from 3.2 meters to 3.4 meters at the moment, optimizing the space available for monopolists.
2, 3 kinds of whole machine can be vertical, horizontal tilt. After opening the die, close the end of the motor press twist, monopolist can enter the machine to take products, liquidation mold.
3, concave convex core pumping mechanism, from the original two guide posts to four guide posts, so that the guide function better, concave convex core pumping more stable.
4, concave and convex translation by screw handle adjustment and positioning, and locking nut. Undo the hydraulic moving die position when damaging the die.
|Rated voltage (KV)||24|
|Insulator(capacity)||insulating||Frequency withstand voltage 5 min (KV)||65|
|Frequency withstand voltage 1 min (V)||2000|
|Lighting impulse withstand voltage (KV)||125|
|Dispute bend (N)||≥10000|
Contact Person: Cheng