Cold Rolled IP40 Electrical Withdrawable Switchgear Low Voltage

Place of Origin wenzhou
Brand Name Qiupu
Certification GB17467
Model Number GCS
Minimum Order Quantity Negotiable
Price Negotiable
Delivery Time 7 days
Payment Terms L/C, D/A, D/P, T/T, Western Union, MoneyGram
Supply Ability 500
Product Details
Material Cold Rolled Steel Color Customized
Frequency 50/60HZ Usage Electricity Transmission Project
Standard IEC Standard Protection Level IP30/IP40
High Light

Electrical Withdrawable Switchgear


IP40 Withdrawable Switchgear


Cold Rolled Withdrawable Switchgear

Leave a Message
Product Description

GCS Low-voltage withdrawable switchgear


Product description


GCS devices are suitable for power distribution systems in power plants, petroleum, chemical, metallurgy, textile, high-rise buildings and other industries. In large-scale power plants, petrochemical systems and other places with a high degree of automation and computer interfaces, it is used as a three-phase AC frequency of 50 (60) Hz, rated working voltage of 380V (400V, 660V), and rated current of 4000A and below. , Low-voltage complete set of power distribution equipment used in power distribution, centralized motor control and reactive power compensation in the power supply system


Model and its meaning


Cold Rolled IP40 Electrical Withdrawable Switchgear Low Voltage 0

①AC enclosed low-voltage switch cabinet
③Electrical system

④Main circuit plan number
⑤ Number of auxiliary circuit scheme


Conditions of Use
• The ambient air temperature is not higher than +40°C and not lower than -5°Co. When the average temperature within 24 hours must not exceed +35°Co, it needs to be derated according to the actual situation.
• For indoor use, the altitude of the place of use must not exceed 2000m.
• The relative humidity of the surrounding air does not exceed 50% when the highest temperature is +40°C, and a larger relative humidity is allowed at lower temperatures, such as 90% at +20°C, and the possibility of temperature changes should be considered Will have the effect of condensation.
• When the device is installed, the inclination to the vertical surface does not exceed 50°C, and the entire group of cabinets is relatively flat (in accordance with the GBJ232-82 standard).
• The device should be installed in a place where there is no violent vibration and impact and not enough to prevent the electrical components from corroding.


Technical Parameters


name parameter
Rated voltage of main circuit (V) AC 380(400),(660)
Auxiliary circuit rated voltage (V) AC 220,380(400),DC 110,220
Rated frequency (Hz) 50(60)
Rated insulation voltage (V) 660(1000)
Rated current (A) Horizontal bus W 4000
Vertical bus (MCC) 1000
Busbar rated short-time withstand current (kA, l s)   50.80
Rated peak withstand current of busbar (kA/   105 ,176
Power frequency test voltage (V/lmin) Main building 2500
Auxiliary circuit 1760
Busbar Three-phase five-wire system A.B.C.PE.N
Protection level   IP30,IP40


Installation dimension drawing


Cold Rolled IP40 Electrical Withdrawable Switchgear Low Voltage 1


General cabinet code A B C D Remarks
GCS-TG1010-4 1000 1000 850 956 Contact cabinet
GCS-TG0810-4 800 1000 650 956 Power receiving cabinet
GCS-TG0808-4 800 800 650 756 Power receiving cabinet
GCS-TG0608-4 600 800 450 756 Power receiving cabinet


Need to know when ordering


The following technical information should be provided when ordering:
• The full model of the product includes the main circuit plan number and the auxiliary circuit plan number
•Combination sequence diagram of main circuit system
• Electrical schematic diagram of auxiliary circuit
• List of components in the cabinet
• Setting parameters such as voltage, current and time in the circuit
•Other special requirements that are inconsistent with the normal use of the product


high voltage switchgear components,lightning impulse withstand voltage