-
Epoxy Resin Insulator
-
Medium Voltage Insulators
-
High Voltage Epoxy Resin Insulator
-
Vacuum Circuit Breaker
-
Epoxy Resin Bushing
-
Electrical Switchgear Components
-
Cast Resin Transformer
-
Earthing Switch
-
Copper Electrical Contacts
-
High Voltage Disconnect Switch
-
Zinc Oxide Lightning Arrester
-
Industrial Cable Ties
-
Electrical Conduit Plastic Pipe
-
High Voltage Indicators
-
Moulded Case Circuit Breaker
-
Load Breaker Switch
-
StephanQiuPu is a great electric power factory. we satisfy you very much . will cooperate with you again!
Red Low Voltage Standoff Insulator 12 FT LBS Torgue Strength Pollution Resistance
Contact me for free samples and coupons.
Whatsapp:0086 18588475571
Wechat: 0086 18588475571
Skype: sales10@aixton.com
If you have any concern, we provide 24-hour online help.
xMaterial | DMC | Torgue Strength | 12 FT LBS |
---|---|---|---|
Higth | 20MM-60MM | Screw | 12mm |
Screw Material | Copper | Dia | 35mm-60mm |
Highlight | bus support insulators,electrical standoff insulators,DMC Low Voltage Standoff Insulator |
MNS Low Voltage Standoff Insulator With Low Voltage Switchgear
Features:
Therefore, the area of pollution should be strengthened insulation or the use of anti-fouling insulator, its climbing distance(climbing distance to rated voltage ratio) should be higher than the normal type. Compared with AC insulators, DC insulators have poor electric field distribution, adsorbed dirt particles and electrolysis, and low flashover voltage.
Mechanical performance: Insulators are often subjected to the gravity and tension of wires, wind, ice-covered weight, insulator self-weight, conductor vibration, equipment operating mechanical force, short circuit electrical power, earthquake and other mechanical force. The relevant standards have strict requirements for mechanical performance.
Thermal performance: Outdoor insulators require the ability to withstand abrupt changes in temperature. For example, porcelain insulators require several cold and hot cycles without cracking. Due to the current passing through the insulated sleeve, the temperature rise of the parts and insulation parts and the allowable short-term current value must meet the relevant standards.
Tensile Strength | 650 LBS |
Voltage Withstand | 12kV |
Torgue Strength | 12 FT LBS |
Screw Depth | 14mm |