-
Epoxy Resin Insulator
-
Medium Voltage Insulators
-
High Voltage Epoxy Resin Insulator
-
Vacuum Circuit Breaker
-
Epoxy Resin Bushing
-
Electrical Switchgear Components
-
Cast Resin Transformer
-
Earthing Switch
-
Copper Electrical Contacts
-
High Voltage Disconnect Switch
-
Zinc Oxide Lightning Arrester
-
Industrial Cable Ties
-
Electrical Conduit Plastic Pipe
-
High Voltage Indicators
-
Moulded Case Circuit Breaker
-
Load Breaker Switch
-
StephanQiuPu is a great electric power factory. we satisfy you very much . will cooperate with you again!
Indoor Electrical High Voltage Epoxy Resin Insulator For Switchgear Post Type
Contact me for free samples and coupons.
Whatsapp:0086 18588475571
Wechat: 0086 18588475571
Skype: sales10@aixton.com
If you have any concern, we provide 24-hour online help.
xColor | Red | Material | Casting Resin |
---|---|---|---|
Rate Voltage | 40.5kV | Frequency Voltage | 100 KV |
Creepage Distance | 810mm | Flexural Strength | 8 KN |
Dia | 140mm | Higth | 390mm |
Highlight | electrical post insulators,high voltage post insulators |
ZN8-40.5kV Casting Resin Support Insulators with KYN61 Switchgear
Item | Name | Rated voltage (KV) | Rated frequency(Hz) | Frequency withstand voltage 5 min (KV) | Local discharge (pc) | Creep distance (mm) | Dispute bend (kN) | Lighting impulse withstand voltage (KV) |
1 | Insulators(140*390) | 40.5 | 50 | 98 | ≤10 | >810 | ≥10 | 185 |
2 | Reactance Insulators(140*390) | 40.5 | 50 | 98 | ≤10 | >810 | ≥10 | 185 |
3 | Contactor box (1250A) | 12 | 50 | 45 | ≤10 | >240 | ≥8 | 80 |
4 | Contactor box (1600A) | 12 | 50 | 45 | ≤10 | >240 | ≥8 | 80 |
5 | Wall bushing (260*395) | 40.5 | 50 | 98 | ≤10 | ≥840 | ≥10 | 185 |
Epoxy resin pressure gel molding machine APG equipment factory produced by the epoxy resin molding machine good functioning, low noise, electricity consumption
Epoxy resin molding machine is a special pressure gel equipment which produces the product of the finished edge, casing, contact box, Transformer, etc.
The following models are available: epoxy resin molding machine 868-V, heating plate 800 x 650mm, epoxy resin molding machine 888-V, heating plate 800 x 800mm, epoxy resin molding machine 10108-V heating plate 1000 X 1000mm, epoxy resin molding machine 858-2V heating plate 800 x 500MM, epoxy resin molding machine is our factory through many years of practical experience and improved design, and the pressure of epoxy resin molding machine has been verified by customers for many years To date, a complete series of epoxy pressure molding machines have been developedTo date, a complete series has been developed. The pressure molding machine of epoxy resin adopts PTL C, which is more humane, and has the following characteristics in comparison with the domestic products: